The BG-6 is a 6.5" Pre-Loaded Subwoofer rated at 250 Watts RMS with an internally wired 1.5 Inch 2 Ohm voice coil final configuration. These subwoofers use tight Red stitching that’s sewn through a UV treated non-pressed paper cone onto a EROM foam surround. Then it’s bonded to a heavy gauge steel basket that’s bolted to double stacked high flux Y30 70oz Strontium Ferrite magnets with a 10mm top plate. Then everything dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring loaded 5-way binding nickel plated speaker connectors.
FEATURES:
- Heavy gauge Steel Basket with Industrial Texture Painting
- Dual Stacked High Flux Y30 70oz Strontium Ferrite Magnets
- Dual Impedance / 1.5" 4 Layer Hi-Temp Voice Coil
- Poly Cotton Spider with Woven Round Tinsel Leads
- UV Treated / Non-Pressed Paper Cone with EROM Foam Surround
- Round Shape PP Vacuum Dust Cap
- 10mm Top Plate / 18mm X-MAX
- Customized Rubber Gasket & Magnet Boot
- Black Anodized Deep Steel Woofer Bars
- Dual Impedance Black Anodized Former
- 5 Way Binding Push Terminals
- High Quality Industrial Grade Carpet
SPECIFICATIONS:
- Size: 6.5"
- Watts RMS: 250w
- Peak Power: 500w
- Cone: UV Treated / Non-Pressed Paper
- Voice Coil: 1.5" Dual 4 Ohm
- Surround: EROM Foam
- Magnet: 70oz
- Terminals: 5 Way Binding Push Terminals
- Basket: Heavy Gauge Steel
- Tinsel Leads: Woven Round
- X-Max: 9mm (1-way) + 10mm Top Plate
- SPL: 88 dB @2.83V/1m
- FS: 58.8Hz
- Dimensions: 14" x 9" x 8" (35,5 x 22,8 x 20,3 cm)
